Your vehicle: Suzuki GSF 650 SA Bandit ABS WVCZ 2010

Engine Displacement: 650 ccm
Power: 86HP / 63kW
Oil capacity (incl. filter): 3.5 Litres
Viscosity: SAE10W-40
Oil classification: API SF JASO MA

Find your bike via manufacturer/year of manufacture/model:

or via the quick selection:

Show articles for your model

Model-dependent product

Alloy Handlebar "Tour" 7/8 inch Raximo TÜV approved for model: Suzuki GSF 650 SA Bandit ABS WVCZ 2010

Alloy Handlebar "Tour" 7/8 inch Raximo TÜV approved

SKU: RA21096-996916
Category: Handlebar Raximo
Manufacturers: RAXIMO

Colour

£ 35.19

incl. 0% VAT , plus

Available immediately

Model-dependent product

Suitable for your selected model: Suzuki GSF 650 SA Bandit ABS WVCZ 2010

This item has variations. Please select the requested variation.

Description
Reviews

Raximo Handlebar "Tour" – TÜV for model: Suzuki GSF 650 SA Bandit ABS WVCZ 2010

"Tour" is the handlebar that allows many tours with its width of 810 mm and a height of 95 mm and a offset of 83 mm for a relaxed ride. Available in 8 colors, allows to decorate your bike as you like.

The High torsional rigidity is also obtained with a material thickness of 5 mm
To increase safety against twisting of the handle, the left side of the handlebar is ribbed.

Models are included in the ABE for which the TÜV and us have not only tested the material and design of the handlebar, but also the cable lengths and the specifications of the new handlebar. With the original parts, which is a guarantee of security.
Handlebars that meet this requirement of the TÜV will be displayed after vehicle selection above the basket button in a green field (specific model).

The handlebar is also available as a universal handlebar but must then be accepted and registered by the German TÜV.
If the new handlebars are extended or if the angles are changed, the cables or wires may be too short and need to be retrofitted at a accessories dealer.

Before ordering a preliminary check can be made. For this, the distance between the center of the handlebar and the right edge of the handlebar have to be measured.

If the diagonal measurement does not change significantly the size of our handlebars, it is likely mean that not much will be changed on the cables and pipes.

Technical details:

High strength aluminum handlebar
Ø 28mm for tightening and 22mm outside
Perfect fit thanks to the laser engraved scale

Dimensions:

Width: 810mm
Height: 95mm
rear offset : 83mm
Exterior diameter for tightening: 28mm
Exterior diameter for handles: 22mm
Inner diameter: about 12mm
Width about when fixing: 170mm

The handlebars are delivered with an ABE (German TÜV), no registration in the vehicle documents is required if the model is in the ABE vehicle list.
If your vehicle is not listed in the ABE, you can still mount the handlebars accordance the § 19.2 StVZO (German Road Regulations) at your TÜV control center in your area and get it registered it in the vehicle documents.

Content:
1 x Raximo Handlebar " Tour "
1 x TÜV