Your vehicle: Triumph Scrambler 1200 XE DS01 2019

Engine Displacement: 1200 ccm
Cylinder: 2
Power: 90HP / 66kW
Oil capacity (incl. filter): 3.4 Litres
Viscosity: SAE10W-40
Oil classification: API SH JASO MA

Find your bike via manufacturer/year of manufacture/model:

or via the quick selection:

Show articles for your model

Model-dependent product

Alu Dragbar Raximo conical 28.6 mm and hole for cable routing for model: Triumph Scrambler 1200 XE DS01 2019

Alu Dragbar Raximo conical 28.6 mm and hole for cable... for Triumph Scrambler 1200 XE DS01 2019

Alu Dragbar Raximo conical 28.6 mm and hole for cable routing

SKU: RA21101-A-34266
Category: Handlebar Raximo
Manufacturers: RAXIMO

color

£ 42.26

incl. 0% VAT , plus

Available immediately

Model-dependent product

Suitable for your selected model: Triumph Scrambler 1200 XE DS01 2019

This item has variations. Please select the requested variation.

Description
Reviews

Raximo handlebar "Flat Drag Bar" conical 28,6mm with TÜV for model: Triumph Scrambler 1200 XE DS01 2019

The extra flat Drag Bar handlebar from Raximo is perfect for conversions for choppers, cruisers and nakedbikes.
and gives your motorbike the individual Drag Star character

High-strength tubular aluminium handlebar
28.6 mm in the clamping area and 22 mm outside
Alignment for easy alignment with the handlebar clamp
With holes in the handlebar for individual internal routing of the cables from the handlebar fittings.
Dimensions:

Width: 825 mm
Offset to the rear: 100 mm
Outside diameter in the area of the clamp: 28.6 mm
Outside diameter in the area of the grips: 22.2 mm
Inner diameter: approx. 12 mm
Width approx. at mounting: 220mm

The holes on the outside and in the middle of the handlebar are for individual routing of the armature wiring. Please note, most fittings have a locking pin in the switch unit, a hole is not present in the handlebar, this must still be drilled yourself, we have 4mm and 5mm handlebar drilling templates if required in the offer.

Our handlebars are delivered with a German ABE (General Operating Permit), there is no need for registration in the vehicle documents. If your vehicle is not listed in the ABE, you can have the handlebars approved by your responsible TÜV test centre in accordance with §19.2 StVZO and have them entered in the vehicle documents.