Your vehicle: Ducati Hypermotard 821 B2 2013-2015

Oil capacity (incl. filter): 3.3 Litres
Viscosity: SAE15W-50
Oil classification: API SE
Front tyre: 120/70-17 58W
Rear tyre: 180/55-17 73W

Find your bike via manufacturer/year of manufacture/model:

or via the quick selection:

Show articles for your model

Model-dependent product

Alu Dragbar Raximo with ABE 22,2mm and hole for cable routing for model: Ducati Hypermotard 821 B2 2013-2015

Alu Dragbar Raximo with ABE 22,2mm and hole for cable... for Ducati Hypermotard 821 B2 2013-2015

Alu Dragbar Raximo with ABE 22,2mm and hole for cable routing

SKU: RA21099-A-41623
Category: Handlebar Raximo
Manufacturers: RAXIMO

color

£ 35.19

incl. 0% VAT , plus

Available immediately

Model-dependent product

Suitable for your selected model: Ducati Hypermotard 821 B2 2013-2015

This item has variations. Please select the requested variation.

Description
Reviews

Raximo handlebar "Flat Drag Bar" TÜV approved for model: Ducati Hypermotard 821 B2 2013-2015

The extra flat Drag Bar handlebar from Raximo is perfect for conversions for choppers, cruisers and nakedbikes.
and gives your motorbike the individual Drag Star character

High-strength tubular aluminium handlebar
22,2 mm in the clamping area and 22,2 mm outside
Alignment for easy alignment at the clamp of the handlebars
With holes in the handlebar for individual internal routing of the cables from the handlebar fittings.

Dimensions:

Width: 800 mm
Offset to the rear: 96 mm
Outer diameter in the area of the clamp: 22.2 mm
Outside diameter in the area of the grips: 22.2 mm
Inner diameter: approx. 12 mm
Width approx. at mounting: 210mm

The holes on the outside and in the middle of the handlebar are for individual routing of the armature wiring.
Please note, most fittings have a locking pin in the switch unit, a hole is not present in the handlebar, this must be drilled yourself, we have 4mm and 5mm handlebar drilling templates if required in the offer.

Our handlebars are delivered with a German ABE (General Operating Permit), an entry in the vehicle documents is not necessary. If your vehicle is not listed in the ABE, you can have the handlebars approved by your responsible TÜV test centre in accordance with §19.2 StVZO and have them entered in the vehicle documents.