Chain kit standard
for Model: Fantic Caballero Flat Track 125 CA12 2019-
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Front sprocket AFAM 14 teeth
AFAM standard drive sprocket
AFAM uses the best available steel alloy to manufacture its sprockets.
Minimal manufacturing tolerances combined with AFAM's racing proven tooth profile,
ensure the highest quality and longest lasting sprockets for your motorcycle.
Technical data:
Pitch 428 / 2 holes / hole spacing 32mm / internal gearing 6
inner diameter min. 16mm / inner diameter max. 20mm
Scope of delivery:
1 x front sprocket
Sprocket steel 61 teeth
AFAM steel sprockets
C45 steel sprockets
All AFAM steel sprockets are made of C45N steel and the teeth are induction hardened.
These sprockets, in combination with high quality chains, ensure maximum service life.
The absolutely round, flat and concentric chainring with the unique AFAM tooth profile makes it one of the best alternatives on the after-market.
Technical data:
Pitch 428 / inner diameter 136mm
Bolt circle 156mm / Bore 8,5mm
Scope of delivery:
1x sprocket
D.I.D standard chain G&B428NZ/140 with clip lock gold-black
DID is an original equipment manufacturer for many Japanese and European brands. Leading racing teams in
road and off-road sports rely on DID technology.
The 428NZ has been developed with regard to the requirements of SX and MX racing and is therefore specially reinforced.
The rollers of the 428NZ are made of round material and therefore have no seam. Weak points, as with rolls made of wound sheet metal strips,
are thus avoided. In addition, rivets produced by a special process (SDH), which have a high surface hardness, speak in favor of the 428NZ.
- solid rolls made of round material
- specially hardened rivets (SDH technology
Technical data:
428 pitch / 140 links / running index 410.
tensile strength 2600kg / with clip lock
Scope of delivery:
1 x D.I.D.Standard chain