Chain kit standard
for Model: Honda MSX 125 JC75 2020
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Sprocket front coarse-toothed JT Sprocket 15 teeth
- The JT Sprockets manufacturing facility is now the largest and most modern sprocket and chainwheel production facility in the world. JT Sprockets produces the full range of aftermarket and original equipment sprockets and chainwheels.
- After subsequent heat treatment, each item is inspected by hand
Features:
- coarse toothing
- perfectly suited for sporty riding
- Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 420 / 2 holes / hole spacing 30mm / internal teeth 6
inner diameter min. 14mm / inner diameter max. 17mm
Scope of delivery
1 x pinion
Sprocket steel JT Sprocket 34 teeth
The JT Sprockets manufacturing facility is now the largest and most modern sprocket and chainwheel manufacturing facility in the world. JT Sprockets produces the full range of aftermarket and original equipment sprockets and sprockets.
After subsequent heat treatment, each item is inspected by hand
Features:
- Galvanised finish extends sprocket durability
- Perfectly suited for sporty riding
- Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 420 / inner diameter 58mm
Pitch circle 90mm / Bore 8,5mm
Scope of delivery
1 x steel sprocket
D.I.D O-ring chain 420V/106 with clip lock
- The standard DID chain has no seal between the lateral outer plates and the inner plates, which means that dirt, dust and water can quickly penetrate the inside of the chain unhindered.
- With the O-ring DID chain, the inner part has a permanent grease filling and is sealed against the outer part of the chain by an O-sealing ring.
- Lubrication is improved, dirt stays out.
- With proper care and average use, the chain kit usually lasts around 15,ooo KM upwards
Technical data:
420 pitch / 106 links / running index 700
Tensile strength 1610kg / with rivet lock
Advantages:
- Sealed with an O-ring
- Better lubrication
- very high mileage
- lower weight compared to other chains
- Perfectly equipped, you are well equipped against dirt and water
Scope of delivery
1 x D.I.D. O-ring chain