Chain kit standard
for Model: KTM Duke 200 2017-2019
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Sprocket front coarse-toothed JT Sprocket 14 teeth
- The JT Sprockets manufacturing facility is now the largest and most modern sprocket and chainwheel production facility in the world. JT Sprockets produces the full range of aftermarket and original equipment sprockets and chainwheels.
- After subsequent heat treatment, each item is inspected by hand
Features:
- coarse toothing
- perfectly suited for sporty riding
- Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 520 / 2 holes / hole spacing 34mm / internal teeth 6
inner diameter min. 16mm / inner diameter max. 20mm
Scope of delivery
1 x pinion
ZF Sprocket 42 teeth
ZF Dual sprockets are among the highest quality and most technically advanced sprockets in the world.The secret is based on the combination of the durability of steel and the lightness of duralumin.
This aluminum alloy is characterized by enormous strength and tightness, as well as light weight.
The tensile strength is about 11 times that of pure aluminum.
Through hardening, duralumin reaches almost the strength of steel.
Consequently, lower weight and higher durability have been achieved.
Millings in the tooth base of the sprocket guarantee optimal self-cleaning.
These milled grooves ensure that dirt cannot accumulate between the teeth and thus the chain and sprocket do not wear out so quickly.
The durability of ZF-Dual sprockets is about three times longer than pure aluminum sprockets and are 50% lighter than steel sprockets.
Best suited for street and off-road use.
Technical data:
Pitch 520 / inner diameter 63mm
bolt circle 110mm / bore 8,5mm
Scope of delivery:
1 x sprocket
D.I.D X-ring chain 520VX3/118 with rivet lock
- The X-ring DID drive chain differs from the DID chain with O-ring by improved sealing of the chain link plates by means of an inserted X-shaped sealing ring.
- An "X" is formed in the cross-section. This ring seals at 4 contact points and thus achieves even better protection against contamination and leakage of the grease filling from the inside of the chain.
- This results in an even longer service life of the chain and thus of the complete motorbike chain kit. With proper care and average use, the chain kit usually lasts around 25,000 KM or more
Technical data:
520 pitch / 118 links / running index 3500
tensile strength 3720kg / with rivet lock
Advantages:
- improved sealing
- very high running performance
- up to 50% less friction compared to an O-ring seal
- Perfectly equipped, you are well equipped against dirt and water
Scope of delivery
1 x D.I.D. X-ring chain