Chain kit standard
for Model: Yamaha XJ 600 SN Diversion RJ01 1998-2003
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Front sprocket steel by JT Sprockets
- JT Sprockets is the world's leading aftermarket sprocket manufacturer, constantly raising the industry's standards of quality and service.
JT Sprockets is committed to providing the most durable and highest quality sprockets available on the market worldwide.
For this reason, JT Sprockets produces and sells more sprockets than all other aftermarket brands combined.
Raw materials
JT Sprockets sprockets and sprocket wheels are made from only the best materials available.
- SCM420 chrome molybdenum steel alloy for the front sprockets.
- Ultra-durable high carbon C49 steel for the rear sprockets.
Manufacturing
- JT Sprockets' factory is the largest and most modern in the world. It is fully equipped with high precision machinery, including the latest generation of CNC manufacturing machines. The most important thing about a high quality sprocket or chainwheel is the precision of the manufacturing process and the quality of the material. Through precision machining, JT Sprockets ensures maximum durability and performance. JT Sprockets sprockets and chain wheels are manufactured the right way - by hobbing, machining and drilling. This is the only proven method to achieve the tightest tolerances and most accurate tooth profiles. All JT Sprockets sprockets are heat treated and hand inspected to meet or exceed the highest possible quality standards in the motorbike industry.
Quality Control
- Each sprocket goes through up to 25 production steps and 10 individual quality checks before leaving the factory.
Technical data:
- Pitch: 520
- Mounting: Fine toothing
- Inner diameter min.: 21.4 mm
- Max. inside diameter: 23 mm
- Internal teeth (number of teeth): 22
- Number of holes: without hole
- Width: 16.8 mm
- Type: Standard
- Manufacturer: JT
- Number of teeth: 16
Scope of delivery
- 1 front sprocket fine toothed JTF582.16
Sprocket steel JT Sprocket 48 teeth
The JT Sprockets manufacturing facility is now the largest and most modern sprocket and chainwheel manufacturing facility in the world. JT Sprockets produces the full range of aftermarket and original equipment sprockets and sprockets.
After subsequent heat treatment, each item is inspected by hand
Features:
- Galvanised finish extends sprocket durability
- Perfectly suited for sporty riding
- Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 520 / inner diameter 125mm
Pitch circle 145mm / Bore 10,5mm / Weight 1000 gramm
Scope of delivery
1 x steel sprocket
D.I.D X-ring chain 520VX3/110 with rivet lock
- The X-ring DID drive chain differs from the DID chain with O-ring by improved sealing of the chain link plates by means of an inserted X-shaped sealing ring.
- An "X" is formed in the cross-section. This ring seals at 4 contact points and thus achieves even better protection against contamination and leakage of the grease filling from the inside of the chain.
- This results in an even longer service life of the chain and thus of the complete motorbike chain kit. With proper care and average use, the chain kit usually lasts around 25,000 KM or more
Technical data:
520 pitch / 110 links / running index 3500
tensile strength 3720kg / with rivet lock
Advantages:
- improved sealing
- very high running performance
- up to 50% less friction compared to an O-ring seal
- Perfectly equipped, you are well equipped against dirt and water
Scope of delivery
1 x D.I.D. X-ring chain