Chain kit standard
for Model: Yamaha YZ 250 F 4T 2020
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Front sprocket AFAM 13 teeth
AFAM standard drive sprocket
AFAM uses the best available steel alloy to manufacture its sprockets.
Minimal manufacturing tolerances combined with AFAM's racing proven tooth profile,
ensure the highest quality and longest lasting sprockets for your motorcycle.
Technical data:
Pitch 520 / without hole / internal teeth 20
inner diameter min. 20mm / inner diameter max. 22,1mm
Scope of delivery:
1 x front sprocket
Sprocket steel 50 teeth
AFAM steel sprockets
C45 steel sprockets
All AFAM steel sprockets are made of C45N steel and the teeth are induction hardened.
These sprockets, in combination with high quality chains, ensure maximum service life.
The absolutely round, flat and concentric chainring with the unique AFAM tooth profile makes it one of the best alternatives on the after-market.
Technical data:
Pitch 520 / inner diameter 130mm
Pitch circle 150mm / Bore 8,5mm
Scope of delivery:
1x sprocket
D.I.D Motocross Chain 520MX/114 with Clip Lock
- DID 520MX Motocross chain is a heavy-duty chain for Enduro and Motocross use.
- designed for very high loads off-road as well as for races
- Colour outer plate: Gold
- colour inner plate: black
- without sealing rings for the least loss of power
520 pitch / 114 links / running index 440
Tensile strength 4050 kg
Advantages:
Very high load capacity
Designed for motocross racing
Clip lock for quick exchange on the race track
Scope of delivery
1 x 520MX Motocross chain