Chain kit standard
for Model: Zontes G1 125 X 2022-
Here you get the chain set in the standard version, i.e. sprocket, chain wheel and chain in the ratio as it was originally delivered.
In our configurator you can select the sprocket and the chain wheel if you wish, the chain length is calculated on the basis of the selected sprocket or chain wheel.
Conversion Chainset Configurator
Here you can get a Conversion Chainset with the original gear ratio.
In our configurator you can select the sprocket and the sprocket wheel, if desired. The chain length is calculated on the basis of the selected sprocket and the sprocket wheel.
It is possible that an exact match of the selected gear ratio with the chain is not possible and the chain may have to be shortened, but you will never get a chain that is too short.
The conversion kit deviates from the original chain kit pitch, which is very popular, for example, for race track use.
A chain with a higher tensile load is always used as the standard chain in the conversion kit, as a (smaller) chain is usually used here.
Front sprocket fine toothed Esjot 14 teeth
The Esjot production facility is today the largest and most modern production facility for sprockets and chain wheels in the world. Esjot
produces the entire range of sprockets and chain wheels for the aftermarket and original equipment.
After subsequent heat treatment, each item is inspected by hand.
Features:
fine-toothed
perfectly suited for sporty riding
Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 520 / without bore/ internal teeth 19
inner diameter min. 18mm / inner diameter max. 20mm
Scope of delivery:
1 x sprocket
Sprocket steel Esjot 46 teeth
ESJOT - Antriebstechnik GmbH is a medium-sized company, which has specialized in sprockets for over 80 years.
Features:
- Galvanised finish extends sprocket durability
- Perfectly suited for sporty riding
- Milled using CNC data technology; a process that offers 100% accuracy and precision
Technical data:
Pitch 520 / inner diameter 91mm
Bolt circle 112mm / Bore 10,5mm
Scope of delivery
1 x steel sprocket
D.I.D X-ring chain 520VX3/112 with rivet lock
- The X-ring DID drive chain differs from the DID chain with O-ring by improved sealing of the chain link plates by means of an inserted X-shaped sealing ring.
- An "X" is formed in the cross-section. This ring seals at 4 contact points and thus achieves even better protection against contamination and leakage of the grease filling from the inside of the chain.
- This results in an even longer service life of the chain and thus of the complete motorbike chain kit. With proper care and average use, the chain kit usually lasts around 25,000 KM or more
Technical data:
520 pitch / 112 links / running index 3500
tensile strength 3720kg / with rivet lock
Advantages:
- improved sealing
- very high running performance
- up to 50% less friction compared to an O-ring seal
- Perfectly equipped, you are well equipped against dirt and water
Scope of delivery
1 x D.I.D. X-ring chain